manualshive.com logo in svg

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Novell ZENworks 10 Configuration Management SP3 - Network Discovery Database Structure - это системное руководство для администраторов системы, которое поможет в настройке и управлении сетевыми ресурсами. Скачайте бесплатное руководство по системному администрированию с нашего сайта manualshive.com.

Поделиться
Скачать
background image

120

ZENworks 10 Configuration Management System Administration Reference

n

ov

do

cx (e

n)

  16
 Ap
ril 20

10

or

zman zenserver-backup /root/zcm_backups/zone_backup.bak

3

When prompted, enter a ZENworks administrator name and password.

4

When prompted, enter a passphrase (at least 10 characters) to be used for encrypting the backup 
file.
Make sure you remember this passphrase. You must enter it if you ever need to restore the 
server.

5

(Conditional) If this is your only Primary Server, or if this is the only Primary Server that 
contains all content defined in your Management Zone, manually back up your content 
repository to a safe location.
For information on the content repository, see 

Chapter 28, “Content Repository,” on page 237

.

IMPORTANT: 

If this is the only Primary Server that contains all of your defined content for 

the Management Zone and you do not back up the content repository, you are not prepared for 
a full disaster recovery.

6

Repeat 

Step 1

 and 

Step 5

 on a regular basis.

The zman command documented in 

Step 2

 through 

Step 4

 only needs to be run once.

10.2  Restoring a ZENworks Server

This procedure assumes the following:

Š

You have a backup of the ZENworks Server’s configuration information. See 

Section 10.1, 

“Backing Up a ZENworks Server,” on page 119

.

Š

If the ZENworks database resides on the ZENworks Server, you have a backup of the database. 
See 

Section 34.3, “Backing Up the Embedded Sybase SQL Anywhere Database,” on page 295

.

Š

The bundles and policies that are stored on the ZENworks Server have been replicated to other 
ZENworks Servers. If not, distribution of a policy or bundle from the restored ZENworks 
Server fails. 

Š

The image files that are stored on the ZENworks Server are available on another ZENworks 
Server. If not, distribution of the image files from the restored ZENworks Server will fail.

IMPORTANT: 

 When you restore the ZENworks Server and the database, you must first restore the 

ZENworks Server, then continue with restoring the latest backed-up ZENworks database. 

To restore a ZENworks server:

1

Reinstall the ZENworks Server, using the same IP address and DNS name.
If you do not use the same IP address and DNS name, any devices that connect to the server 
need to reregister.
If you have only one Primary Server connected to an external database in a zone, reinstall the 
Primary server and create a dummy database during the installation. You do not need to create 
an internal database.
If you have more than one Primary server connected to an external database in a zone, reinstall 
the failed Primary server as a second Primary Server. You are not prompted to configure the 
database during the installation.

Содержание ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE

Canon iR2270 Series Product Description preview
iR2270 Series
Бренд: Canon Страницы: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Бренд: Canon Страницы: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Бренд: Canon Страницы: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Бренд: Canon Страницы: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Бренд: Canon Страницы: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Бренд: Canon Страницы: 109
IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Бренд: IBM Страницы: 25
NETGEAR GS110TP - ProSafe Gigabit Smart Switch Installation Manual preview
GS110TP - ProSafe Gigabit Smart Switch
Бренд: NETGEAR Страницы: 2
Imation IronKey Workspace Provisioning Tool 1.0 User Manual preview
IronKey Workspace Provisioning Tool 1.0
Бренд: Imation Страницы: 19
Intel Active Management Technology v5.0 Administrator'S Manual preview
Active Management Technology v5.0
Бренд: Intel Страницы: 143
AAS Tassman User Manual preview
Tassman
Бренд: AAS Страницы: 177
3M MultiSync P402 DST User Manual preview
MultiSync P402 DST
Бренд: 3M Страницы: 57
MACROMEDIA DREAMWEAVER 8-GETTING STARTED WITH... Getting Started preview
DREAMWEAVER 8-GETTING STARTED WITH...
Бренд: MACROMEDIA Страницы: 326
VMware VCLOUD REQUEST MANAGER Datasheet preview
VCLOUD REQUEST MANAGER
Бренд: VMware Страницы: 2
RADVision OnLAN User Manual preview
OnLAN
Бренд: RADVision Страницы: 12
MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual preview
FLASH MX 2004-LEARNING FLASH
Бренд: MACROMEDIA Страницы: 122
Juniper CARE PLUS Datasheet preview
CARE PLUS
Бренд: Juniper Страницы: 8
Echo Audio LAYLA LapTop Owner'S Manual preview
LAYLA LapTop
Бренд: Echo Audio Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды