background image

Embedded Database Maintenance

303

n

ov

do

cx (e

n)

  16
 Ap
ril 20

10

34.5.1  Preparing to Move the Data

Before moving the data from an internal Sybase database to an external Sybase database, do the 
following:

Š

Make sure that ZENworks 10 Configuration Management is installed with an internal Sybase 
database on a Windows or Linux device.

Š

Install the external Sybase database. For more information on how to install an external Sybase 
database, see “

Installing an External ZENworks Database

” in the 

ZENworks 10 Configuration 

Management Installation Guide

.

34.5.2  Moving the Data from the Internal Sybase to the External 
Sybase

1

On the device that has the external Sybase database installed, stop the Novell ZENworks 
Embedded Datastore service.

Š

On Windows: 

Do the following:

1. From the Windows desktop 

Start

 menu, click 

Settings

 > 

Control Panel

.

2. Double-click 

Administrative Tools

 > 

Services

.

3. Right-click the 

Novell ZENworks Embedded Datastore

 service, then click 

Stop

, or 

select the 

Novell ZENworks Embedded Datastore

 service, then click   on the toolbar. 

Š

On Linux: 

At the console prompt, enter 

/etc/init.d/./sybase-asa stop

.

2

From the device that has the internal Sybase database installed, copy 

zenworks_database.conf

 and all files within the 

database

 directory to the appropriate 

directories on the device that has the external Sybase database.
The 

zenworks_database.conf

 is located in the 

ZENworks_installation_path

\conf\

 

directory on Windows and in the 

/etc/opt/novell/zenworks/

 directory on Linux.

The 

database

 directory is located in 

ZENworks_installation_path

 on Windows and in the 

/var/opt/novell/zenworks/

 directory on Linux.

3

On the device that has the external Sybase database installed, open 

zenworks_database.conf

 

and make sure that it contains the correct path of the database file. 

4

On the device that has the internal Sybase database installed, edit 

zdm.xml 

(located in 

ZENworks_installation_path

\conf\datamodel

 on Windows and in 

/etc/opt/novell/

zenworks/datamodel

 on Linux): 

Š

Change the value of the 

Embedded

 entry key to 

false

. By default, it is 

true

.

Š

Set the value of the 

Server

 entry key to the IP address of the device that has the external 

Sybase database installed.

Š

Make sure that the value of the 

Port

 entry key is the port number on which the external 

Sybase database is running. 

5

On the device that has the external Sybase database installed, start the Novell ZENworks 
Embedded Datastore service.

Š

On Windows: 

Do the following:

1. From the Windows desktop 

Start

 menu, click 

Settings

 > 

Control Panel

.

Содержание ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE























































































































































































































































































































































































Отзывы: