Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 238 / 374

238 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2 Because an empty
content-repo
directory must exist in the default location
(
installation_path \zenworks\work\content-repo
) to be the pointer to the new content
repository location, do one of the following to make sure that there is no content in the default
location:
Š
If you need to save the content that is now in this directory, rename the existing directory
and create a new directory named
content-repo
.
You can later copy the content from this renamed directory to the new content repository
location (see
Step 10 ).
Š If you do not need any of the content in the existing
content-repo
directory, delete the
directory and re-create it.
Š
If the
content-repo
directory is not present in the path given above, create the path and
directory.
3 Click Start , right-click the My Computer icon, then select Manage .
You can also click Start , then enter
compmgmt.msc
at the Run command line.
4 Select Disk Management under the Storage section in the left pane.
The disk drive you selected in Step 1 should be displayed in the right pane.
5 (Conditional) If a driver letter is associated with the partition that you want to use as the new
content repository location, do the following:
5a In the Computer Management dialog box, right-click the drive’s partition.
5b Select Change Drive Letter and Paths .
5c Select the drive letter.
5d Click Remove , then select Yes to confirm.
6 Right-click the partition of the disk drive that you want to use as your content repository, then
select
Change Driver Letter and Paths .
This is the disk drive that you will mount to the
content-repo
directory in Step 8 .
7 Click Add .
This displays the Add Drive Letter or Path dialog box.
8 Select Mount in the Following Empty NTFS Folder , browse for and select the default
content-repo
directory, then click Next .
The default directory is
installation_path \zenworks\work\content-repo
.
This mounts the default path to the hard drive partition that you selected in Step 6 .
If necessary, format the drive as NTFS using the Computer Management feature in Windows.
9 Click the buttons as necessary to exit and save the configuration change.
10 (Conditional; see Step 2 ) Copy the files from the old renamed
content-repo
directory to the
new
content-repo
directory.
From this point on, all ZENworks 10 Configuration Management data is written directly to the new
content repository location on the selected hard drive partition.