Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 49 / 374

Administrators 49
n
ov
do
cx (e
n)
16
Ap
ril 20
10
3 Browse for and select the roles for the administrator, then click OK to display the Add Role
Assignment dialog box:
The Add Role Assignment dialog box is displayed so that you can define the contexts for the
role types included in the role. A context allows you to limit where granted rights can be used.
For example, you can specify that the administrator’s Quick Task Rights role is limited to the
Devices folder in ZENworks Control Center.
Contexts are not required. However, if you do not specify a context, the right is not granted
because it has no information about where it can be applied.
Rights that are global automatically display
Zone
as the context.
4 If necessary, assign contexts to role types where they are missing:
4a In the Types column, click a role type.
Role types that are designated with the Zone context are not clickable because they are
generally available.
4b
In the subsequent Select Context dialog box, click Add and browse for a ZENworks
Control Center context.
While browsing, you can select multiple contexts in the Browse dialog box.
4c When you are finished selecting the contexts for a particular role, click OK to close the
Select Contexts dialog box.
4d
Repeat Step 4a through Step 4c as necessary to assign contexts to the roles.
4e When you are finished, click OK to close the Add Role Assignment dialog box.
5
To add another administrator, repeat Step 2 and Step 4 .
6 Click Apply to save the changes.
Assigning Administrators to Roles
Rights can be set in multiple locations in ZENworks Control Center. Administrators can be assigned
to multiple roles.
If an administrator has rights conflicts because different conditions are set for a particular right in
ZENworks Control Center, the
Deny option is used if it is set anywhere for the administrator. In
other words, Deny always supersedes Allow when there are rights conflicts.
1 In ZENworks Control Center, click Configuration in the left pane, click the Configuration tab,
then in the Roles panel, click a role name in the Name column to open the role’s settings page: