Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE Скачать руководство пользователя страница 323 | Manualshive

Страница: 323 / 374

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE Скачать руководство пользователя страница 323

External Database Maintenance

323

n

ov

do

cx (e

n)

16
Ap
ril 20

10

4

Start the Novell ZENworks Embedded Datastore service on the database server on which you
restored the backed-up database. If you have restored the backed-up database to a different
device, you must start the service on that device as well as on the database server.

On Windows:

Do the following:

1. From the Windows desktop

Start

menu, click

Settings

>

Control Panel

.

2. Double-click

Administrative Tools

>

Services

.

3. Right-click the

Novell ZENworks Embedded Datastore

service, then click

Start

, or

select the

Novell ZENworks Embedded Datastore

service, then click on the toolbar.

On Linux:

At the console prompt, enter

/etc/init.d/./sybase-asa stop

.

5

On the Primary Server to which the database is registered, start the ZENworks Server service.

On Windows:

Do the following:

1. From the Windows desktop

Start

menu, click

Settings

>

Control Panel

.

2. Double-click

Administrative Tools

>

Services

.

3. Right-click the Novell ZENworks Server service, then click

Start

, or select the

Novell

ZENworks Server

service, then click on the toolbar.

On Linux:

At the console prompt, enter the following commands:

/etc/init.d/./novell-zenserver restart

6

(Conditional) If you restore the database to a location other than the one given in the

zenworks_database.conf

file, you must manually edit the file to specify the new location of

the database. The

zenworks_database.conf

file is located by default in the

zenworks_installation_directory

\novell\zenworks\database\conf\

directory on

Windows and in the

/etc/opt/novell/zenworks/

directory on Linux.

35.3 Moving the Data from One External Sybase

Database to another External Sybase Database

ZENworks 10 Configuration Management allows you move the data from one OEM Sybase
database (external Sybase database) to another external Sybase database.

Section 35.3.1, “Preparing to Move the Data,” on page 323

Section 35.3.2, “Moving the Data from One External Sybase to Another External Sybase,” on
page 324

35.3.1 Preparing to Move the Data

Before moving the data from one external Sybase database to another external Sybase database, do
the following:

Make sure that ZENworks 10 Configuration Management is installed with an external Sybase
database on a Windows or Linux device. The data is moved from this database to another
external database.

Make sure that you have another Windows or Linux device with an external Sybase database
installed. For more information on how to install an external Sybase database, see “

Installing

an External ZENworks Database

” in the

ZENworks 10 Configuration Management Installation

Guide

.

«
...
321
322
323
324
325
...
»

Содержание ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE























































































































































































































































































































































































Отзывы:

Нет отзывов