Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 188 / 374

188 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2b Click Add , browse for and select the devices, then click OK .
You can add individual devices or device groups, or any combination of them.
You can have both managed servers and workstations in the same deployment stage or in
different stages, or you can split your servers and workstations into separate deployment
stages.
IMPORTANT: Some of your network servers will be Primary Servers for use in
ZENworks management, while other servers on your network might only be managed
devices with the ZENworks Adaptive Agent installed on them.
You must update your Primary Servers before updating any of the other managed servers
and especially before updating any managed workstations.
2c Repeat Step 2b until you are finished adding members to the stage.
2d To add members to another stage, repeat Step 2a through Step 2c .
3 (Optional) Remove devices from a deployment stage:
3a In the Stage Members column, click View/Modify Members for the stage for which you
want to remove members.
3b Select the check box next one or more devices that you want to remove, then click
Remove .
4 Click OK when you have finished configuring the stage’s membership.
20.2.7 Renaming a Deployment Stage
1 In ZENworks Control Center, click Configuration in the left pane, then click the System
Updates tab.
2
In the Deployment Stages panel, click the check box for the deployment stage to be renamed.
3 Click Rename .
4
In the Rename dialog box, specify the new name, then click OK .
For information about naming in ZENworks Control Center, see Appendix A, “Naming
Conventions in ZENworks Control Center,” on page 361 .