Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 117 / 374

Closest Server Rules 117
n
ov
do
cx (e
n)
16
Ap
ril 20
10
9 When you are finished, click OK to add the rule to the Closest Server Rules list.
10 Repeat Step 2 through Step 9 to create additional rules.
11 If necessary, when you are finished creating rules, do the following:
Š
Use the Move Up and Move Down buttons to reorder the rules in the Closest Server Rules
list.
The rules are evaluated in the order they are listed. You should place the rules in the order
you want them evaluated.
Š
To modify the settings of a rule, select the desired rule, then click Edit .
9.4 Backing Up Closest Server Rules
If your ZENworks Management Zone has complex Closest Server rules configured, you might want
to export these rules as part of your backup procedure.
The following zman commands are useful when backing up Closest Server rules:
Š location-copy-rules (loccp): Copies Closest Server rules data from a source device or device
folder to one or more destination devices or device folders.
Š
location-export-rules-to-file (loctf): Exports Closest Server rules data (in XML format) to a
file. The XML file can be used as input for creating or appending to the Closest Server rules.
Š
location-import-rules-from-file (locff): Imports Closest Server rules data (in XML format)
from a file.
For more information about these commands and their usage, see “ Location Rules Commands ” in
the ZENworks 10 Configuration Management Command Line Utilities Reference .
Remove servers
from an L4 switch
definition 1. In the server list, expand the
L4 switch definition to display
its servers.
2. Select the check boxes for the
servers that you want to
remove from the L4 switch
definition.
3. Click L4 Switch > Remove
from L4 Switch Definition , then
click OK .
4. Click Apply to make the
change effective.
The servers are not removed from
the server list, only from the L4
switch definition.
Remove an L4
switch definition 1. In the server list, click L4
Switch > Remove L4 Switch
Definition , then click OK .
2. Click Apply to make the
change effective.
The L4 switch definition's servers
are not removed, only the definition.
Task Steps Additional Details