Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 107 / 374

Closest Server Rules 107
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2c (Conditional) If you have ZENworks Servers or Satellites that are clustered behind an L4
switch, you can define the L4 switch and add the servers to the definition. This enables the
L4 switch to continue to balance the traffic among those servers.
Task Steps Additional Details
Create an L4
switch definition 1. In the server list, select the
check boxes for the servers to
include in the L4 switch
definition, then click
L4 Switch
> Create L4 Switch Definition
from Selection .
or
If you want to create an empty
L4 switch definition, click
L4
Switch > Create Empty .
You can add servers to the
empty definition later using the
L4 Switch > Add to L4 Switch
Definition option.
2. Specify the DNS name or the
IP address of the L4 switch,
then click
OK to add the L4
switch to the list.
3. Click Apply to make the
change effective.
Add servers to an
L4 switch
definition 1. In the server list, select the
check boxes for the servers
you want to add to the L4
switch definition.
2. Click L4 Switch > Add to L4
Switch Definition .
3. Do one of the following:
Š
To add the selected
servers to a new L4
switch definition, select
Create New and specify
the DNS name or IP
address of the L4 switch,
then click
OK .
Š
To add the selected
servers to an existing L4
switch definition, select
an L4 switch definition
from the list in the
Select
Existing field, then click
OK .
4. Click Apply to make the
change effective.