Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 88 / 374

88 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
The messages are logged in the Message Log panel only if the severity level of the local file
and the system log is set to
Information and Above on the Local Device Logging page.
( Configuration tab > Device Management > Local Device Logging ).
8 (Conditional) If the Linux Satellite has the Imaging role configured, turn off the firewall on the
device before performing imaging operations.
7.3 Removing the Roles from a Satellite
You can choose to remove one or more roles from a Satellite. However, the Satellite must have at
least one role configured for it to continue to perform the Satellite function. If you remove all the
roles, the Satellite is demoted to be only managed device.
Removing a Satellite role does not remove the device from any of the non-default Closest Server
rules. The device is removed from the non-default Closest Server rules only when it is no longer a
Satellite.
To remove one or more roles from a Satellite:
1
In ZENworks Control Center, click the Configuration tab.
2 In the Server Hierarchy panel, select the check box next to the Satellite from which you want to
remove the role.
3 Click Actions > Configure Satellite Server .
4 In the Configure Satellite Server dialog box, deselect the check box next to the Satellite role
you want to remove.
5 Click OK .
7.4 Removing Satellites from the Server
Hierarchy
You can remove a Satellite from the Server Hierarchy listing when that device is no longer needed to
perform Satellite functions. The device’s object isn’t removed from ZENworks; it is just removed
from the Server Hierarchy listing. However, removing a Satellite from the hierarchy listing does
cause the content, imaging, or collection roll-up information to be removed from the device.
When you remove a Satellite, the managed devices that used it must be reconfigured to use another
server for content and collection purposes. For more information, see
Chapter 9, “Closest Server
Rules,” on page 99 .
You cannot use this option to remove a Primary Server from the listing.
To remove a Satellite:
1 For the Satellite that you want to remove, make a note of all devices that are using it for content
and collection information roll-up.
2 In ZENworks Control Center, click the Configuration tab.
3
In the Server Hierarchy panel, select the check box next to the Satellite that you want to remove
from the zone.
4 Click Action > Remove Satellite Server .