Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 86 / 374

86 ZENworks 10 Configuration Management System Administration Reference
n
ov
do
cx (e
n)
16
Ap
ril 20
10
4 (Optional) Specify the content to host on the Content Server. For more information, see
Section 29.4, “Including or Excluding Content,” on page 246 .
If you want to specify the content that the Satellite hosts, you can include or exclude content
from being replicated to it.
If you want to include content that its parent Primary Server does not have, you must first add
the content to the parent Primary Server.
7.2.4 Imaging Role
Selecting this option installs the Imaging services and adds the Imaging role to the device. With this
role, the device can be used as an Imaging server to perform all the Imaging operations, such as
taking an image, applying an image, and multicasting an image. However, the ZENworks images are
not replicated from the Primary Server to Imaging Satellites.
NOTE: The Imaging role is tied to the state of your ZENworks Configuration Management license.
If your license state is deactivated, the Imaging role is disabled. For example, if you have a licensed
copy of ZENworks Asset Management and you are evaluating ZENworks Configuration
Management, the Imaging role is disabled if your ZENworks Configuration Management license
expires. For more information, see
Section 33.5, “Possible License State Changes,” on page 287 .
1 Select the check box next to Imaging , then click Configure .
2 (Conditional) Select the check box next to Enable PXE Services to automatically start the
Proxy DHCP service on the device to which the Imaging Server role has been assigned.
To check whether the Proxy DHCP service has been started on the device, review the message
log of the device (
Devices tab > Workstations folder > click the workstation > Summary >
Message Log panel).
3 (Conditional) Select the check box next to Delete Image Files from the Server if Imaging Role
is Removed if you want the ZENworks image files to be automatically deleted from the device
when the Imaging role is removed from the device.
The messages are logged in the Message Log panel if the severity level of the local file and the
system log is set to
Information and Above on the Local Device Logging page. ( Configuration
tab > Device Management > Local Device Logging ).
This option is available only when you want to remove the Imaging Server role from the
device.
4
Click Options next to Configure Imaging Content Replication to launch the Configure Imaging
Content Replication dialog box.
The Configure Imaging Content dialog box lists a default configuration that applies to the
imaging content, with a fixed interval schedule of every five minutes, no throttling, and a 60-
minute content replication period.
5 Configure the Imaging content replication settings.
5a Select a throttle rate (in KB/sec). This rate specifies the maximum rate at which content is
replicated. The actual rate can be lower, depending on other factors, including the number
of downloads.
5b
Select the duration of the content replication.