Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 56 / 130

56 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
6.8.2 Using the Utility to Consolidate NDPS Printer Agents
Follow these steps to consolidate NDPS Printer Agents to an NDPS Print Manager within the same
eDirectory tree.
1 If necessary, start the Server Consolidation and Migration Toolkit and select the following
options to launch the Server Consolidation Utility:
Š
NetWare or Open Enterprise Server (eDirectory)
Š C onsolidate and Copy Data and Printing Between Servers
2 Create a new consolidation project by following the steps in Section 6.2, “Launch Server
Consolidation Utility and Create a Project File,” on page 42 .
3 Select the same tree for both the source and the destination tree.
Migrating NDPS printers is supported only within the same eDirectory tree. See
Section 6.3,
“Select a Source and Destination Tree,” on page 43 for more information.
4 In the Project Window’s source pane, locate the PSM that has the Printer Agents (printers) you
want to move.
5 In the destination pane, locate the PSM that is to receive the Printer Agents.
6 Drag-and-drop the individual Printer Agents from the source PSM to the destination PSM.
Make sure the PSMs are running on both the source and destination servers before you attempt
to drag-and-drop the associated Printer Agents. If you don’t do this, you will get unpredictable
results.
7 Click Project > Verify and Copy Data to verify the project and start the migration.
The utility checks to ensure that it can communicate with the source Resource Management
Service (RMS) and the destination Print Broker. It also verifies that the moves you want to
make are valid.
During the verification, the Dropped Printers dialog displays the source and destination
locations for the printers you are moving in this consolidation project.
Š
If the source and destination locations are correct, click Next .
Š If the source or destination location is incorrect, click Cancel and make the appropriate
changes in the Project Window.
At the end of the verification, the results dialog is displayed. To ensure a smooth migration, you
should resolve all errors before proceeding.
8 When you are ready to commit the changes, run the consolidation.
See
Section 6.7, “Run the Consolidation,” on page 54 for more information.
9 Upon completion, review both the success and error log files.
The log file uses three possible states to identify the success of the migration of each Printer
Agent:
Š
Success indicates that the Printer Agent was created on the destination server with all of
its attributes and drivers.
Š
Partial Success indicates the Printer Agent was created on the destination server but not all
of its attributes and drivers were included, so you should review its configuration.
Š
Failure indicates that the Printer Agent was not created on the destination server.