Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 45 / 130

Consolidating Data from NetWare Servers 45
no
vd
ocx
(e
n)
6 Ap
ril 20
07
Š
Rename: The directory on the source server is copied to the destination server with a new name
assigned to it. You must enter a new name in the field provided if you select this option.
Š Merge All: If you are dragging-and-dropping multiple directories at once, select this option if
you want to merge the contents for all duplicate directories.
1 Click the radio button next to the option you want.
2 Click OK .
Other Project Window Options
In addition to dragging-and-dropping objects, you can perform several other tasks from the Project
Window menu:
Š Save project settings: Click File > Save As .
Š
Move created and dropped objects around by dragging them to the desired location.
Š Create a new container or folder: Select the parent container or existing folder in the right pane,
then click
Edit > New Folder .
Š
Cancel a “dropped” action: Select the volume or directory in the right pane, then click Edit >
Back Out .
Š
Rename a newly created container or folder: Select the parent container or existing folder in the
right pane, then click
Edit > Rename .
Š
Show where a folder or object went: Select the object in the left pane, then click Edit > Where
Did It Go . The directory or volume that was moved is highlighted in its new location in the
right pane.
Š
Show where a folder or object came from: Select the object in the right pane, then click Edit >
Where Did It Come From . The directory or volume that it came from is highlighted in the left
pane.
Š
Show all folders or objects selected for copying: Select a container in the left pane, then click
Edit > Show Dropped Folders (or Show Dropped Printers ).
TIP: The previous six tasks can also be performed by right-clicking the object to see the same
menu option.
Š View the available disk space before performing the verification by right-clicking the
destination volume in the right pane of the Project Window and then selecting
Properties .
Right-clicking the source folder or volume in the left pane of the Project Window and then
selecting
Properties displays the size of the source object.
6.5 Perform Pre-Copy Verifications
After you have dragged-and-dropped the selected directories or volumes and have performed any
other modeling tasks, proceed by clicking
Project > Verify and Copy Data or by clicking Do the
Consolidation on the button bar.
NOTE: These instructions assume you have not enabled server-based processing. If you have, refer
to the additional information in Section 6.12, “Server-Based Processing,” on page 61 .