Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 103 / 130

Migrating Data from NetWare Servers 103
no
vd
ocx
(e
n)
6 Ap
ril 20
07
If there were errors discovered in the verification attempt, they are shown in the Error
Resolution dialog box. Errors could include name conflicts, insufficient rights, required name
spaces not loaded, and insufficient disk space.
Errors found during the verification process are classified as follows:
Š
Errors that must be resolved before files can be copied
Š
Errors that should be resolved but might not affect the copy process
Š
Informational messages about the decisions you made in the Project Window
A description of each error and a possible resolution appear in the Information text box. If no
resolution is provided, you can find more information in the
Novell Error Codes online
documentation (http://www.novell.com/documentation/nwec/index.html) . Search the system
by error code number.
13 (Conditional) If newer NLM
TM
programs are available and you want to copy them to your
system, select Yes in the dialog box that appears.
14 In the Ready to Copy Files dialog box, read the explanation of the file copy process and then
click
Proceed .
The Migration Wizard proceeds with the trustee backup and file copy.
15 When the Copy Volumes Status screen appears, review the error and success logs and then
click
Done .
Continue with the next section, Migration Step 2: Edit Configuration Files .
11.6 Migration Step 2: Edit Configuration Files
The Edit Configuration Files step compares the configuration files between the source and
destination servers and lets you make any desired changes to those files.
1 In the Project View dialog box, click Edit Configuration Files .
Migration Wizard lets you modify any
.ncf
or
.cfg
files on the destination server. These
files contain default LOAD statements and parameters.
IMPORTANT: Make sure that all files are closed before you migrate your eDirectory
database.
2 In the text box, select the configuration file that you want to edit and then click Edit File .
3 Copy and paste the commands from the configuration file on the source server to the
corresponding configuration file on the destination server, then click
Save & Close .
If you intend to change the IP address on your destination server to be the same as the IP
address of your source server, you must edit your configuration files and change the IP address
in two places:
autoexec.ncf
and
sys:\etc\hosts
.
Copy the source server’s IP address and paste it into the destination server’s
autoexec.ncf
file. (This works only if your IP LOAD and BIND statements are located in
autoexec.ncf
.)
You also need to go to the server console of the destination server and change the IP address in
the
sys:\etc\hosts
file. Look for the original name of the destination server.
If you use INETCFG to assign IP addresses, change the IP addresses after the migration is
complete.