Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 104 / 130

104 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
4 (Conditional) If you are using configured time sources (
timesync.cfg
), copy and paste
your Timesync information from the source server’s
timesync.cfg
file to the destination
server’s
timesync.cfg
file.
5 Close the Compare Configurations dialog box.
Continue with the next section, Migration Step 3: Begin NDS/eDirectory Migration .
11.7 Migration Step 3: Begin NDS/eDirectory
Migration
The Begin NDS/eDirectory Migration step migrates the eDirectory files from the source server to
the destination server. The source server is brought down and the destination server is restarted
during this step.
1 In the Project View dialog box, click Begin NDS/eDir Migration .
2 Before continuing, back up all volumes that you are not planning to migrate, ensure the
following, and then click
Next :
Š All volume data migrated successfully
Š
All critical errors from the file copy are resolved
Š The servers in your source tree are in time synchronization and eDirectory is synchronized
Verify that you have run the DSRepair procedures in Section 10.2, “Preparing the Source
Server for Migration,” on page 94 to ensure that the eDirectory tree containing the source
server is functioning correctly.
TIP: If you are required to fix any eDirectory errors, wait approximately 30 minutes for the
eDirectory tree to synchronize before continuing.
3 In the Update Schema dialog box, indicate whether you want the Migration Wizard to update
the source server's schema and then click
Next .
Š
Yes is the default selection. This causes the Migration Wizard to compare the source and
destination schemas and update the source server's schema to include the eDirectory
classes of the default applications that are installed on the destination server. You must be
logged in as a user with all rights to the [Root] of the tree to make these changes.
Š
If you do not have the necessary rights to extend the schema, select No . The migration
continues, but you might experience some problems with your eDirectory tree if you skip
this procedure.
4 In the Verify Novell Directory Services Tree dialog box, select Yes to acknowledge that the
source eDirectory tree is healthy (you should have run the DSRepair procedures in Step 2 ).
If you select No , the Migration Wizard does not prevent you from continuing. However, if your
tree is unhealthy before you begin the migration, the migration might not complete
successfully.
5 To ensure the security certificate works properly on the destination server, indicate how you
want to copy the source server’s NICI configuration files to the destination server and then
click
Next .
To facilitate the NICI file copy,
nuwnici.nlm
is first copied to both the source and
destination servers. You can choose to copy the NICI files Automatically (over the network) or
using a diskette swap.