Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 42 / 130

42 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
This feature is enabled on an NSS volume either by using ConsoleOne
®
or by entering
nss /filecopyonwrite= volname
at the source server console to change the volume attributes.
For example,
nss /filecopyonwrite=vol1
would enable File Copy on Write for the vol1:
volume. The effect is immediate, but it affects only files that are currently closed and then opened
later.
6.1.2 Cluster Failover Stops File Copy
If you run a server consolidation project involving a NetWare cluster and the cluster fails over
during the consolidation, the file copy will stop. The consolidation project must be run again.
6.1.3 User Space Restrictions Only Migrated in Full Volume
Copies
In consolidation projects where individual folders are dragged and dropped, or where a volume is
copied to a folder on the destination server, user space restrictions on the source volume are not
migrated to the destination volume.
If your consolidation project is set up to copy an entire volume, with the contents of the source
volume being copied to the root of the destination volume, user space restrictions are migrated to the
destination volume. If user space restrictions already exist on the destination volume, they are
overwritten with the restrictions migrated from the source volume.
6.2 Launch Server Consolidation Utility and
Create a Project File
The Server Consolidation Utility is a Windows program that is launched from the Server
Consolidation and Migration Toolkit.
1
If you have not already done so, start the Server Consolidation and Migration Toolkit.
By default, the toolkit is installed in
c:\program files\novell server
consolidation and migration toolkit
. You can access it by clicking Start >
Programs > Novell Server Consolidation and Migration Toolkit > Novell Server Consolidation
and Migration Toolkit .
2 Read the Welcome page, then click Create or Open Project .
3 Select NetWare or Open Enterprise Server (eDirectory) , then click Next .
4 Select Consolidate and Copy Data and Printing Between Servers , then click Next .
5 Read the About screen, then click OK .
6 Do one of the following:
Š To start a new consolidation project, click Create a New Project > OK . Then continue with
Step 7 on page 43 .
Š To open an existing project, click Open an Existing Project > OK , select the project you
want to work on, and then click Open . Then skip to Section 6.4, “Model Your
Consolidation Project,” on page 43 .