Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 116 / 130

116 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
2 Select Directory Options > Directory Backup and Restore > Restore Local DS Information
after Hardware Upgrade.
3
Press F3 and enter
sys:system\nuw30\ndsbu
when prompted for the location of the
backup files.
NDS/eDirectory has now been restored to the source server.
IMPORTANT: Do not reboot the destination server. Because the destination server did not
take over the identity of the source server, no other action is required prior to performing the
NDS/eDirectory migration again.
4 Perform the NDS/eDirectory migration again.
4a Launch Migration Wizard and open the project you were previously working on.
4b When the project opens and you see the Project Window, click Begin NDS/eDir
Migration .
4c Follow the instructions in Section 11.7, “Migration Step 3: Begin NDS/eDirectory
Migration,” on page 104 .
12.5.2 Remove NDS/eDirectory from the Destination Server
If Begin NDS/eDir Migration (Step 3) successfully completed and the destination server has already
rebooted and taken on the name and identity of the source server, you must remove NDS/eDirectory
from the destination server before you can restore NDS/eDirectory to the source server.
1 At the destination server console, enter
nwconfig
.
2
Select Directory Options > Remove Directory Services from This Server .
3 Press Enter when you see a warning instructing you to not remove Directory Services.
Ignore any other errors during the removal of NDS/eDirectory.
4 Select Yes to remove Directory Services.
5
Specify the Admin username and password.
6 Press Enter to reference a different object.
This object is used when NDS/eDirectory is restored back to the source server.
WARNING: Do not press Esc. If you do, the server references you entered will not be saved or
restored to the server.
7 Specify the full Admin username as the placeholder object distinguished name.
8
Specify Root as the distinguished name to change from.
9 (Conditional) If the information about the single reference time source appears, review the
information and press Enter.
10 (Conditional) If your server holds the master copy of a replica, press Enter when you see a
warning.
11
Designate another server to hold the master replica.
You can choose to let NWCONFIG randomly select another server or you can designate one
yourself.
12 Return to the NWCONFIG utility and select Remove Directory Services from This Server to
verify that NDS/eDirectory has been removed.