Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 102 / 130

102 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
test.txt
8 In the Synchronize Files and Folders dialog box, specify whether you want the Migration
Wizard to delete files and folders on the destination server that do not exist on the source server
and then click
Next .
If users are active on the source server while you model your migration project, it is possible
that they could delete files and folders that you have already selected for migration.
Š
Select Yes if you want the Migration Wizard to scan all dropped folders after the copy
process completes and delete any files and folders from the destination server that don’t
exist on the source server.
Š
If you don’t want to synchronize files and folders, select No (the default selection).
9
In the File Comparison dialog box, specify whether you want the Migration Wizard to compare
files and folders between the source and destination servers after the copy process completes
and then click
Next .
Š If you don’t want to enable the comparison option, select No (the default selection).
Š
Selecting Yes causes the Migration Wizard to compare the following information during
the post-copy file comparison:
Š
Names
Š
Dates
Š
Sizes
Š
Attributes
Š
Trustees
Š
Owners
If you select Yes , you are given the option of doing a binary comparison of the files after
the copy process completes. A binary (byte-by-byte) comparison gives the greatest
assurance that two files are identical, but it takes longer to complete.
By default, the Migration Wizard compares the Read inhibit (Ri) and Delete inhibit (Di)
attributes on Read-only files. If you do not want this check to be performed, deselect
Compare Ri/Di Attributes for Read-only files .
10 Specify where to store the trustee backup files, then click Next .
Before Migration Wizard starts copying files, it backs up trustee and ownership information for
the source server's standard sys: volume and dropped folders to special trustee backup files for
use only by Migration Wizard. When the eDirectory migration is complete, Migration Wizard
restores the trustees from the files stored on the destination server.
The trustee backup files are stored on the destination server’s sys: volume by default. If your
destination server has limited free space on volume sys:, you can select another volume to hold
the backup files.
11 Type the passwords for the source and destination trees, then click Next .
SMS is the backup and copy engine used by the Migration Wizard. You type your passwords
here because SMS requires that the servers involved in the migration be authenticated to each
other.
12 (Conditional) If prompted, resolve any critical errors or warnings discovered during
verification and then click
Next .