Novell Server Consolidation and Migration Toolkit 1.2, Руководство администратора

Страница: 122 / 130

122 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
13.2.1 Copying Data from NetWare 5.1 Source Servers
The following additional steps are required for NetWare
®
5.1 source servers. They are not necessary
for NetWare 6.0, NetWare 6.5, or OES NetWare servers.
1 On the NetWare 5.1 server, install the updated SMS Target Service Agent (TSA) modules
included in
tsa5up18.exe
or later. To download this update, see TID #2971717 (http://
support.novell.com/cgi-bin/search/searchtid.cgi?/2971717.htm) .
2 On the OES Linux server, install the new SMS tsafs (.39) rpm that comes with the Server
Consolidation and Migration Toolkit.
3 Change the language setting on the OES Linux server to match the language on the NetWare
server, as explained in
Section 13.2, “Changing the Language Setting on OES Linux Servers,”
on page 121 .
4 Unload the tsafs module by typing the following command at the shell prompt:
/opt/novell/sms/bin/smsconfig -u tsafs
5 Reload the tsafs module with support for multi-byte character set data (this command is case-
sensitive):
/opt/novell/sms/bin/smsconfig -l tsafs --useCodeset=SJIS-WIN
6 Verify the new setting by typing the following command:
/opt/novell/sms/bin/smsconfig -t
13.3 Changing the NetWare Server Code Page
When using the Server Consolidation Utility to copy extended ASCII and double-byte character set
data from NetWare
®
to NetWare, the source and destination NetWare servers must have the same
code page set, or data will be lost during the consolidation.
WARNING: Novell does not recommend converting a foreign-language code page server back to
English, nor converting a foreign-language code page server to another foreign-language code page.
If either is done, it is possible that documents and folders named with or containing foreign
characters might become irreversibly corrupted.
There are two recommended ways to create a NetWare server with foreign-code page support:
Š
Install the server with the regional support you want
Š
Convert an English server to a foreign-language code page
13.3.1 Install a NetWare Server with Regional Support
To install an English server with code page support for a foreign language, you must have an English
NetWare installation CD or access to English NetWare install files.
1 Begin the NetWare installation.
For information on installing your specific version of NetWare, see the Novell online
documentation (http://www.novell.com/documentation) .
During the installation, a Regional Settings screen displays. You see three options:
Š
Country: 001 (USA)