Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 80 / 485

80 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
The default policy settings are often appropriate. By default, a volume resource:
Š
Fails over automatically if the node it is running on fails
Š
Starts automatically on the next node in its failover path
Š
Continues running at its failover location, even after its most preferred node is again
available
If you are considering changing these defaults, see the applicable section about failover and
failback modes in the cluster documentation for your version of NetWare, as listed in
Chapter 1, “Introduction to GroupWise 7 and Novell Cluster Services on NetWare,” on
page 21
.
5 Click OK when you are finished editing the Internet Agent volume resource properties.
6 Continue with Enabling Internet Addressing for Your Clustered GroupWise System .
Enabling Internet Addressing for Your Clustered GroupWise System
Setting up Internet addressing for a clustered Internet Agent is no different from setting it up for an
Internet Agent in a any other environment. Follow the instructions in “
Enabling Internet
Addressing ” in “ System ” in the GroupWise 7 Administration Guide , then return to this point.
Verifying Internet Agent Object Properties
During installation of the Internet Agent, the Internet Agent object should have been configured
correctly. However, it can be helpful to verify certain cluster-specific information in order to
familiarize yourself with the configuration of a clustered Internet Agent.
Š
“Accessing Internet Agent Object Properties” on page 80
Š
“Verifying the Reference to the Volume Resource” on page 81
Š
“Verifying the Reference to the Virtual Server” on page 81
Š
“Verifying Post Office Links” on page 81
Š
“Forcing Use of the Internet Agent Secondary IP Address” on page 81
Accessing Internet Agent Object Properties
1 In ConsoleOne, browse to and select the Internet Agent domain in order to display its contents.