Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 188 / 485

188 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Section 16.6, “WebAccess Agent Clustering Worksheet,” on page 204 lists the information you need
as you set up the WebAccess Agent in a clustering environment. You should print the worksheet and
fill it out as you complete the tasks listed below:
Š
Section 16.2.1, “Planning a Domain for the WebAccess Agent,” on page 188
Š
Section 16.2.2, “Selecting the WebAccess Agent Partition and Secondary IP Address,” on
page 189
Š
Section 16.2.3, “Determining an Appropriate Failover List for the WebAccess Agent,” on
page 189
Š
Section 16.2.4, “Determining Cluster Resource Information for the WebAccess Agent,” on
page 189
Š Section 16.2.5, “Planning the MTA Installation,” on page 190
Š
Section 16.2.6, “Planning the WebAccess Agent Installation,” on page 190
Š Section 16.2.7, “Planning the WebAccess Application Installation,” on page 190
16.2.1 Planning a Domain for the WebAccess Agent
The considerations involved in planning a domain for the WebAccess Agent are much the same as
planning any other domain. In preparation, review “
Planning a New Domain ”, then print and fill out
the “ Domain Worksheet ” in “ Domains ” in the GroupWise 7 Administration Guide .
Keep in mind the following cluster-specific details:
Š
When you specify the location for the domain directory on the Domain Worksheet, remember
that it is on a
GroupWise partition , not on the node where you running the GroupWise
Installation program. This location is referred to as the WebAccess Agent partition because it is
where the WebAccess Agent message queues are located.
Š
Do not concern yourself with the GroupWise agent information on the Domain Worksheet. You
can stop with
item 10 . You will plan the MTA installation later.
When you have completed the Domain Worksheet, transfer the key information from the Domain
Worksheet to the WebAccess Agent Clustering Worksheet.
IMPORTANT: Do not create the new domain until you are instructed to do so in Section 16.3.1,
“Creating a Domain for the WebAccess Agent,” on page 191 .
WEBACCESS AGENT CLUSTERING WORKSHEET
Under Item 1: GroupWise Partition for the WebAccess Agent , transfer the domain location to the
WebAccess Agent Clustering Worksheet.
Under Item 2: WebAccess Agent Domain Name , transfer the domain name and database directory to
the WebAccess Agent Clustering Worksheet.