Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 153 / 485

Setting Up a Domain and a Post Office in a Linux Cluster 153
n
ov
do
cx (e
n)
11
Ju
ly 20
08
4 Select the GroupWise Cluster Resource object that you created when you set up the GroupWise
partition, then click
Properties .
The default load script from a generic IP service template appears as follows:
#!/bin/bash
. /opt/novell/ncs/lib/ncsfuncs
# mount the file system
exit_on_error mount -t reiserfs /dev/evms/vol /mnt/generic
# add the IP address
exit_on_error add_secondary_ipaddress a.b.c.d
# start the service
exit_on_error /etc/init.d/myservice start
# return status
exit 0
5 If this is an NSS volume or a shared pool, make the following changes to set up the load script
for the agents:
5a As needed, in the
mount
command, change
reiserfs
to whatever file system type is in
use on nodes in the cluster ( System Clustering Worksheet item 5 ).
5b In the
mount
command, change vol to the actual device name in use on nodes in the
cluster ( System Clustering Worksheet item 5 ).
5c In the
mount
command, change
/mnt/generic
to the mount point directory in use on
nodes in the cluster ( System Clustering Worksheet item 5 ).
5d
In the
add_secondary_ipaddress
command, change
a.b.c.d
to the secondary
IP address of the GroupWise partition ( System Clustering Worksheet item 7 or System
Clustering Worksheet item 8 )
5e
In the start service command, change
myservice start
to the command to start the
GroupWise agent or agents that you want to run on this GroupWise partition.