Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 157 / 485

Setting Up a Domain and a Post Office in a Linux Cluster 157
n
ov
do
cx (e
n)
11
Ju
ly 20
08
RESOURCE_IP=172.16.5.18
# define the mount point
MOUNT_POINT=/mnt/mount_point
sleep 8
ignore_error fuser -k $MOUNT_POINT
# del the IP address
ignore_error del_secondary_ipaddress $RESOURCE_IP
# umount the file system
exit_on_error umount $MOUNT_POINT
# return status
exit 0
Make the following changes to set up the unload script for the agents.
3a Use the following command to stop the MTA:
/etc/init.d/grpwise stop domain
3b Use the following command to stop the POA:
/etc/init.d/grpwise stop post_office . domain
3c On the
RESOURCE_IP line,
change
172.16.5.18
to the secondary IP address
used in the load script.
3d On the
MOUNT_POINT
line, change
/mnt/mount_point
to the mount point directory
used in the load script.
3e
Adjust the
sleep
command as needed so that the agents can shut down normally on your
system without being inadvertently killed by the
fuser -k
command that follows.
3f In the
fuser -k
command (used if the agents do not stop normally), change
-k
to
-mk
.
The
-m
parameter obtains the PID numbers of the processes to kill.
4 Click OK to save the unload script.
Setting the Failover List and Policies for the Agents
1 On the Cluster Resource Properties page of the GroupWise cluster resource, click General .