Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 179 / 485

Implementing the Internet Agent in a Linux Cluster 179
n
ov
do
cx (e
n)
11
Ju
ly 20
08
2 If this is an NSS volume or a shared pool, make the following changes:
2a In the stop service command, change
myservice stop
to the command to stop the
Internet Agent and its MTA.
/etc/init.d/grpwise stop domain . gwia
/etc/init.d/grpwise stop domain
2b Adjust the
sleep
command as needed so that the Internet Agent and its MTA can shut
down normally on your system without being inadvertently killed by the kill service
command.
2c In the kill service command (used if the Internet Agent and its MTA do not stop normally),
change
-k
to
-mk
.
The -m parameter obtains the PID numbers of the processes to kill.
2d In the kill service command, change
/mnt/generic
to the mount point directory used
in the load script.
2e
In the
del_secondary_ipaddress
command, change
a.b.c.d
to the secondary
IP address used in the load script.
2f In the
umount
command, change
/mnt/generic
to the mount point directory used in
the load script.
3 If this is a traditional Linux volume, use the following unload script:
#!/bin/bash
. /opt/novell/ncs/lib/ncsfuncs
/etc/init.d/grpwise stop domain.gwia
/etc/init.d/grpwise stop domain
# define the IP address
RESOURCE_IP=172.16.5.18
# define the mount point
MOUNT_POINT=/mnt/mount_point
sleep 8
ignore_error fuser -k $MOUNT_POINT
# del the IP address
ignore_error del_secondary_ipaddress $RESOURCE_IP
# umount the file system
exit_on_error umount $MOUNT_POINT
# return status
exit 0
Make the following changes to set up the unload script for the Internet Agent.
3a Use the following command to stop the Internet Agent:
/etc/init.d/grpwise stop domain . gwia
3b Use the following command to stop its MTA:
/etc/init.d/grpwise stop domain