Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 309 / 485

Setting Up a Domain and a Post Office in a Heartbeat Cluster 309
n
ov
do
cx (e
n)
11
Ju
ly 20
08
To create a new secondary domain in a clustering environment:
1 In the HA Management Client , start the EVMS container resource and the file system resource
in order to mount the shared storage partition where the new secondary domain will be created.
2 In ConsoleOne, connect to the primary domain in your GroupWise system, as described in
“
Connecting to a Domain ” in “ Domains ” in the GroupWise 7 Administration Guide .
3 Create the new domain, following the steps provided in “ Creating the New Domain ” in
“ Domains ” in the GroupWise 7 Administration Guide .
Use the Domain Worksheet you filled out in Section 13.3, “Planning a New Clustered
Domain,” on page 136 to fill in the fields in the Create GroupWise Domain dialog box.
4 In the Link to Domain field, link the new domain to the primary domain of your GroupWise
system.
5 Use the Link Configuration tool to change the links from the new domain to all other domains
in the cluster to direct TCP/IP links, following the steps provided in “
Changing the Link
Protocol between Domains to TCP/IP ” in “ Message Transfer Agent ” in the GroupWise 7
Administration Guide .
Although a complete mesh link configuration is the most efficient, it might not be feasible in all
situations. Set up as many direct TCP/IP links as possible for best MTA performance in the
cluster.
6 Make sure you are still connected to the primary domain.
7 Rebuild the domain database for the new domain, following the steps provided in “ Rebuilding
Domain or Post Office Databases ” in “ Databases ” in the GroupWise 7 Administration Guide .
The database rebuild is necessary in order to transfer the MTA configuration information and
the domain link information into the secondary domain database, because the MTA for the new
domain is not yet running.
8
Skip to Section 14.4, “Installing and Configuring the MTA and the POA in a Cluster,” on
page 146 to install the MTA software for the new domain.
32.3 Creating a New Post Office in a Heartbeat
Cluster
You can create a new post office in the same cluster resource group where its domain resides or in a
separate cluster resource group. If the post office and its domain are in the same cluster resource
group, they fail over together. If they are in separate cluster resource groups, they fail over
separately.
To create a new post office in a clustering environment:
1 In the HA Management Client , start the EVMS container resource and the file system resource
in order to mount the shared storage partition where the domain that will own the new post
office is located.
2 If necessary, start the EVMS container resource and the file system resource for the new post
office.
3 In ConsoleOne, connect to the GroupWise domain where you want to create the new post
office, as described in “
Connecting to a Domain ” in “ Domains ” in the GroupWise 7
Administration Guide .