Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 197 / 485

Implementing WebAccess in a Linux Cluster 197
n
ov
do
cx (e
n)
11
Ju
ly 20
08
5b In the
mount
command, change
vol
to the actual device name in use on nodes in the
cluster.
5c
In the
mount
command, change
/mnt/generic
to the mount point directory in use on
nodes in the cluster.
5d In the
add_secondary_ipaddress
command, change
a.b.c.d
to the secondary
IP address of the WebAccess Agent partition ( WebAccess Agent Clustering Worksheet
item 1 )
5e In the start service command, change
myservice start
to the command to start the
WebAccess Agent and its MTA.
/etc/init.d/grpwise start domain
/etc/init.d/grpwise start webac70a
6 If this is a traditional Linux volume, use the following load script:
#! /bin/bash
. /opt/novell/ncs/lib/ncsfunc
# define the IP address
RESOURCE_IP=123.123.1.
# define the file system type
MOUNT_FS=reiserf
# define the device
exit_on_error evms -f /var/opt/novell/ncs/ContainerActivate -rl
Share ‘uname -n‘
MOUNT_DEV=/dev/evms/Share/dat
# define the mount point
MOUNT_POINT=/mnt/mount_point
# mount the file system
exit_on_error mount -t $MOUNT_FS $MOUNT_DEV $MOUNT_POINT
# add the IP address
exit_on_error add_secondary_ipaddress $RESOURCE_IP
/etc/init.d/grpwise start domain
/etc/init.d/grpwise start domain . webac70a
exit 0
Make the following changes to set up the load script for the agents:
6a On the
RESOURCE_IP
line, change
123.123.1.1
to the secondary IP address of the
GroupWise partition ( WebAccess Agent Clustering Worksheet item 1 )
6b As needed on the
MOUNT_FS
line, change
reiserfs
to whatever file system type is in
use on nodes in the cluster.
6c On the
MOUNT_DEV
line, change
/dev/evms/Share/dat
to the actual device name
in use on nodes in the cluster.
6d On the
MOUNT_POINT
line, change
/mnt/mount_point
to the mount point directory
in use on nodes in the cluster.
6e Use the following command to start the MTA: