Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 76 / 485

76 GroupWise 7 Interoperability Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
To set up the load script:
1 In ConsoleOne, browse to and select the Cluster object.
If necessary, click
View > Console View to display its contents.
2 Right-click the Volume Resource object ( volume _SERVER), then click Properties > Load to
display the default volume resource load script for the Internet Agent volume.
The next step assumes that this is the first time you have edited this load script. If other
GroupWise agents are already running from this volume, some of the modifications have
already been made.
3 Make the following changes to the default load script:
Š Remove the
trustmig
command. It is not necessary to migrate trustees for the Internet
Agent volume. Removing this line helps the load script to execute faster.
Š
On NetWare 5.1, if you are using SLP as a short name resolution method, as described in
“Configuring Short Name Resolution” on page 44 , add the
cvsbind add
command for
the Internet Agent volume to the load script.
cvsbind add cluster _ volume _SERVER IP_address
Š
If you selected
vol :\system
on Internet Agent volume as the installation location
( Internet Agent Clustering Worksheet items 4 and 6 ), add a
search add
command to
add the new
vol :\system
directory to the server search path.
search add volume :\system
Š
If you selected
sys:\system
on each node as the installation location ( Internet Agent
Clustering Worksheet items 4 and 6 ) but you are storing the MTA startup file and the
Internet Agent configuration file on the Internet Agent volume, add that location to the
server search path.
Š If you marked No under Load Internet Agent and Its MTA in Protected Memory? ( Internet
Agent Clustering Worksheet item 8 ), add the following abend recovery options:
set auto restart after abend = 2
set auto restart after abend delay time = 0
set auto restart down timeout = 60
set developer option = off
These settings provide the best possible handling of GroupWise databases in the event that
an abend should occur within the cluster.
Š Transfer the MTA
load
command from the
grpwise.ncf
file located in the
vol :\system
directory into the load script. Use Ctrl+C and Ctrl+V to copy and paste
text into the load script page. Then delete or rename the
grpwise.ncf
file to avoid
future confusion.
load volume :\system\gwmta.nlm @ domain .mta
Š
Add a delay so that the MTA is fully loaded before the Internet Agent starts to load:
load delay.nlm
delay 10
The length of the delay varies from system to system; ten seconds is a good starting place.