Novell GROUPWISE 7 - INTEROPERABILITY GUIDE, Руководство пользователя

Страница: 49 / 485

Setting Up a Domain and Post Office in a NetWare Cluster 49
n
ov
do
cx (e
n)
11
Ju
ly 20
08
8 Rebuild the domain database for the new domain, following the steps provided in “ Rebuilding
Domain or Post Office Databases ” in “ Databases ” in the GroupWise 7 Administration Guide .
Be sure to browse to the database location (under System Clustering Worksheet item 10 )
through the virtual server that was created when you cluster-enabled the GroupWise volume.
The database rebuild is necessary in order to transfer the MTA configuration information and
the domain link information into the secondary domain database, because the MTA for the new
domain is not yet running.
9 Continue with Creating a New Post Office in a Cluster .
3.4 Creating a New Post Office in a Cluster
You can create a new post office on the same GroupWise volume where its domain resides or on a
separate GroupWise volume. If the post office and its domain are on the same GroupWise volume,
they fail over together. If they are on separate GroupWise volumes, they fail over separately.
To create a new post office in a clustering environment:
1 If you marked Yes for Post Office on Same Volume as Domain? (under System Clustering
Worksheet item 7 ), map a drive to the GroupWise volume for the domain ( System Clustering
Worksheet item 7 ).
or
Map a drive to the GroupWise volume for the post office (
System Clustering Worksheet item
8 ).
The GroupWise volume name will be cluster _ volume . For assistance with mapping a drive to a
cluster-enabled volume, see “Configuring Short Name Resolution” on page 44 .
2
Manually create the post office directory ( System Clustering Worksheet item 12 ).
This step is not required, but in a clustered environment, Step 4 is easier if the post office
directory already exists.
3 In ConsoleOne, connect to the GroupWise domain where you want to create the new post
office, as described in “
Connecting to a Domain ” in “ Domains ” in the GroupWise 7
Administration Guide .
4 Create the new post office, following the steps provided in “ Creating the New Post Office ” in
“ Post Offices ” in the GroupWise 7 Administration Guide . Keep in mind the following cluster-
specific details:
Š
Use the Post Office Worksheet you filled out in Section 2.4, “Planning a New Clustered
Post Office,” on page 26 to fill in the fields in the Create GroupWise Post Office dialog
box.
Š
In the Post Office Database Location field, be sure to browse through the drive you
mapped in Step 1 to the post office directory you created in Step 2 above.
Š If you want to create a library at the post office ( System Clustering Worksheet item 14 ),
select Create Library .