Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию, Страница: 90 / 144

90 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
Š
Section 9.1.5, “Menu Summary,” on page 91
9.1.1 Information Box
The top portion of the console provides the following information about the gateway.
Domain.Gateway : The domain where the gateway is installed and the name of the gateway.
UpTime: The length of time the gateway has been running.
Description: The description you added when you configured the gateway, as described in
Section 6.2, “Providing Gateway Information,” on page 53 .
9.1.2 Status Box
The Status box provides the following information:
Processing: If the gateway is running, this field displays a spinning bar. If there is no bar or if the
bar is stationary for an extended period, the gateway is not running.
GroupWise: Whether the gateway’s network connection to the GroupWise
®
domain is Open or
Closed. It is normal for this field to briefly display Closed while the gateway is initializing. If the
link shows Closed for an extended period, a network failure, insufficient access rights, or an error in
setup fields could be the problem. Check for error messages in the Log Message box. For assistance
resolving error messages, see
Appendix A, “Error and Informational Messages,” on page 117 .
Other Link: The status of the gateway’s network connection to the Exchange system. Messages
can be sent or received if Other Link is Open. If it is Closed, the network connection has been
terminated. Check the status of the Exchange system.
Program: Where the gateway is in its current processing cycle (sending, receiving, or idle). You
can use the Gateway Time Settings page in ConsoleOne
®
to adjust the processing cycle. For more
information, see Section 10.1, “Adjusting the Gateway’s Send/Receive Cycle,” on page 103 .
Log Level: The logging level the gateway is currently using. The level determines how much
information is displayed in the Logging box and written to the log file. You can set the default
logging level in ConsoleOne, as described in
Section 9.3, “Using Exchange Gateway Log Files,” on
page 97 . You can also change the log level for the current Exchange Gateway session, as described
in “Menu Summary” on page 91 .
9.1.3 Statistics Box
The Statistics box displays the amount of incoming and outgoing gateway traffic. The four columns
display the cumulative totals and the snap shot totals. The four columns from left to right are:
outgoing message totals, snap shot of outgoing messages (the default snap shot interval is 10
minutes), incoming message totals, and snap shot of incoming messages.
The snap shot interval statistic can help you get a more accurate picture of the amount of recent
gateway traffic. For information about changing the snap shot interval, see
Section 10.1, “Adjusting
the Gateway’s Send/Receive Cycle,” on page 103
The following types of status information are provided:
Normal: The number of normal incoming and outgoing messages the gateway has processed.