Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию, Страница: 111 / 144

Using Exchange Gateway Startup Switches 111
no
vd
ocx
(e
n)
6 Ap
ril 20
07
11.9 /help
Displays information about the Exchange Gateway switches.
Syntax:
/help
11.10 /home
Specifies the path to the gateway root directory ( domain \wpgate\ exchange ).
IMPORTANT: You cannot move the Exchange Gateway software to a different location.
Syntax:
/home-[ drive: ]\ directory
/home-\\ server \ sharename \ directory
Example:
/home-\exchgate\work
/work-m:\exchgate\work
/work-\\server2\c$exchngate\work
11.11 /httppassword
Specifies the password for the Exchange Gateway to prompt for before allowing gateway status
information to be displayed in your Web browser. Do not use an existing Novell
®
eDirectory
TM
password because the information passes over the non-secure connection between your Web
browser and the Exchange Gateway. See
Section 9.2, “Using the Exchange Gateway Web Console,”
on page 92 .
Syntax:
/httppassword- password
Example:
/httppassword-GWiseExchange
See also /httpuser , /httpport , and /httprefresh .
11.12 /httpport
Sets the HTTP port number used for the Exchange Gateway to communicate with your Web
browser. The setting must be unique on the server where the Exchange Gateway runs. See
Section 9.2, “Using the Exchange Gateway Web Console,” on page 92 .
Syntax:
/httpport- port_number