Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию, Страница: 106 / 144

106 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
Failed Recovery Wait: If the gateway cannot reconnect to the network after the number of
times specified in Retry Count, it stops attempting to reconnect. Specify the amount of time
you want the gateway to wait until it starts the reconnect process again. The default value is
3600 seconds (1 hour).
Network Reattach Command: You can create a batch file that the gateway can use to
reconnect to the network server where the GroupWise domain directory resides and to the
Exchange/Domino server. Specify the name of the batch file in this field.
5 Click OK to save the reattachment information.
ConsoleOne then notifies the Exchange Gateway to restart so the new settings can be put into
effect.
10.4 Reducing Network Traffic
By default, the Exchange Gateway’s queue directories are located in the
domain \wpgate\ exchange
directory on the server where the domain is located. If the gateway
is not installed on the same server with the domain directory structure, you can reduce network
traffic by redirecting the gateway’s queue directories to the Windows server where the gateway is
running.
If you choose to place the queue directories on the gateway server’s local drive, make sure the
gateway server has sufficient disk space, memory, and processing power to handle the load.
Start the gateway using the following startup switch:
exgate.exe /work - queue_directory
where queue_directory is the path to the directory where you want the gateway queues created. For
example, you could use a
c:\exchgate
directory on the local drive. Make sure the directory is
not used by any other program. The gateway must have exclusive access to the directory; any
unrecognized files in the directory are immediately moved to the
gwprob
subdirectory.
The first time you start the gateway using the /work switch, the gateway creates the necessary file
structure in the specified directory. It creates a
wpgate
directory, with
wpcsin
and
wpcsout
queue directories. This local structure is used as long as you continue to start the gateway with the /
work switch. You might want to add the /work switch to the startup file (
gwexch.cfg
) so the
gateway always uses the same queue directory. See Chapter 11, “Using Exchange Gateway Startup
Switches,” on page 107 .