Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию, Страница: 75 / 144

Configuring the Exchange Gateway 75
no
vd
ocx
(e
n)
6 Ap
ril 20
07
Section Headers
Section headers establish groups of users to which access control settings are applied.
Š
“[Default:In|Out]” on page 75
Š
“[groupwise_domain:In|Out]” on page 75
Š
“[groupwise_domain.post_office:In|Out]” on page 75
Š
“[AccessGroup:group_name]” on page 76
[Default:In|Out]
This section lists the access control settings for users who are not covered by access control settings
for a particular GroupWise domain, post office, or access group.
Syntax:
[Default:In]
[Default:Out]
Examples:
[Default:In]
MaxSize=100000
[Default:Out]
AllowRuleGenerated=No
This example limits incoming messages to 100 KB but does not limit the size of outgoing messages.
It prevents rule-generated GroupWise messages from transferring through the gateway to the
Exchange system. These access control settings would apply to any users who did not fall under a
more specific section header.
[ groupwise_domain :In|Out]
This section lists the access control settings for users in a particular GroupWise domain.
Syntax:
[ groupwise_domain :In]
[ groupwise_domain :Out]
Examples:
[Corporate:In]
MaxSize=100000000
[Corporate:Out]
AllowRuleGenerated=Yes
This example limits incoming messages to 1 MB but does not limit outgoing messages. It allows
GroupWise users to send rule-generated messages.
[ groupwise_domain.post_office :In|Out]
This section lists the access control settings for users in a particular GroupWise post office.