Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию, Страница: 80 / 144

80 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
3 Click GroupWise > Account to display the Account page.
4 Fill in the Gateway Access field.
If you created an access control group in the access.cfg file in Step 1 , specify the name of
the access control group that you want this user to be associated with.
If you have not created an access control group, you can put access control information unique
to this user in the Gateway Access field.
Syntax:
gateway . direction : keyword,keyword,...,keyword ; gateway . direction : keyword,...,keyword
The following keywords are valid in the Gateway Access field:
Š
AllAccess
Š NoAccess
Š
MaxSize
Š AllowRuleGenerated
IMPORTANT: The Block and Allow keywords cannot be used in the Gateway Access field.
They can only be used in the
access.cfg
file.
Example:
Exchange.Out:MaxSize=500000,AllowRuleGenerated=No;Exchange.In:Maxsize=50000
In this example, the gateway name is Exchange, the maximum message size is 500 KB, and
rule-generated messages are prevented from leaving the GroupWise system. The gateway
direction designations and their keywords are separated by a semicolon (;).
5
Click OK to save the access control information for the selected user.
ConsoleOne passes the access control information to the Exchange Gateway so that the access
control settings are in force immediately.