Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION, Руководство по установке и администрированию

Страница: 107 / 144

Using Exchange Gateway Startup Switches
11
no
vd
ocx
(e
n)
6 Ap
ril 20
07
107
11
Using Exchange Gateway Startup
Switches
Startup switches let you set various operational parameters for the gateway. Some startup switches
override configuration information, such as logging level, that you can set in ConsoleOne
®
. Other
switches provide configuration options not available anywhere else.
To use a startup switch, you can include it on the command line immediately following the
exgate.exe
executable command.
Example:
exgate.exe /badmsg-send
You can also edit the Exchange Gateway startup file (
gwexch.cfg
) to include the switches you
want to use when starting the gateway. The
gwexch.cfg
file is located in the
domain \wpgate\ exchange
directory. Use the following syntax to include the startup file:
Example:
exgate.exe @gwexch.cfg
The table below summarizes Exchange Gateway startup switches and how they correspond to
configuration settings in ConsoleOne.
Startup Switch ConsoleOne Setting
/addressrule N/A
/allowdom N/A
/badmsg N/A
/blockdom N/A
/corr N/A
/custom N/A
/displaynamelastfirst N/A
/group N/A
/help N/A
/home N/A
/httppassword HTTP Password
/httpport HTTP Port
/httprefresh N/A
/httpuser HTTP Username
/importsubcontainers N/A