Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 144

Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Скачать руководство пользователя страница 9

About This Guide

no

vd

ocx

(e

n)

6 Ap
ril 20

07

9

About This Guide

This Novell

®

GroupWise

®

7 Gateway for Microsoft Exchange Installation and Administration

Guide

explains how to install, configure, and run the GroupWise 7 Gateway for Microsoft

Exchange. The guide is divided into the following sections:

Chapter 1, “What Is the GroupWise Gateway for Microsoft Exchange?,” on page 11

Chapter 2, “Exchange Gateway System Requirements,” on page 13

Chapter 4, “Installing the Exchange Gateway,” on page 25

Chapter 5, “Configuring the Exchange Side of the Exchange Gateway,” on page 31

Chapter 6, “Configuring the GroupWise Side of the Exchange Gateway,” on page 51

Chapter 7, “Running the Exchange Gateway,” on page 55

Chapter 8, “Configuring the Exchange Gateway,” on page 61

Chapter 9, “Monitoring the Exchange Gateway,” on page 89

Chapter 10, “Optimizing the Exchange Gateway,” on page 103

Chapter 11, “Using Exchange Gateway Startup Switches,” on page 107

Appendix A, “Error and Informational Messages,” on page 117

Appendix B, “Exchange Gateway Directory Structure,” on page 135

Appendix C, “Documentation Updates,” on page 143

Audience

This guide is intended for network administrators who install and administer the GroupWise
Exchange Gateway.

Feedback

We want to hear your comments and suggestions about this manual and the other documentation
included with this product. Please use the User Comment feature at the bottom of each page of the
online documentation, or go to www.novell.com/documentation/feedback.html and enter your
comments there.

Documentation Updates

For the most recent version of the

GroupWise 7 Gateway for Microsoft Exchange Installation and

Administration Guide

, visit the

Novell GroupWise 7 Gateway Documentation Web site (http://

www.novell.com/documentation/gwgateways)

.

Additional Documentation

For additional GroupWise 7 documentation, see the following guides at the

Novell GroupWise 7

documentation Web site (http://www.novell.com/documentation/gw7)

:

Installation Guide

Administration Guide

«
...
7
8
9
10
11
...
»

Содержание GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION

















































































































































Отзывы:

Нет отзывов