APPENDIX D HG1700 IMU in SPAN HG Enclosure
OEM7 SPAN Installation and Operation User Manual v14
301
Figure 132: SPAN IMU Re-Assembly
D.3 Make the Electrical Connections
To make the electrical connections you need a 3/32” hex key, the flex cable and the partially assembled SPAN
IMU from
Install the HG1700 Sensor Unit
on the previous page. Now follow these steps:
1. Attach the flex cable to the HG1700 sensor ensuring that all the pins are fully connected. Check also that the
pins are fully seated and that the flex cable stiffener around the pins is not bent upward, see