Novanta f201 Скачать руководство пользователя

Страница: 11 / 105

INTRODUCTION

PAGE

Introduction

f201 lasers are part of a smaller-footprint lasers from NOVANTA featuring high power and excellent beam

quality. The circular beam provides more accurate cutting and faster processing speeds than competing

technologies. With an integrated RF power supply, meaning no external RF cables, the compact laser

housing mounts easily to flatbed cutters, robotic arms, or gantry systems making integration into your

production line simple and fast.

f201 features include:

•

Compact resonator design

•

Color-coded LEDs mirror user outputs

•

Integrated RF power supply

•

“Industrial-strength” ±5 V to 24 VDC I/O

•

Built-in “tickle” generator

•

Keyswitch and OEM models available.

f201 Nomenclature

f201 lasers are available only as OEM lasers; they do not include either a keyswitch or manual shutter

assembly. NOVANTA’s OEM lasers are primarily designed as components for integration into larger

processing systems by the Original Equipment Manufacturer (OEM) or System Integrator who bears the

responsibility for meeting the appropriate laser safety requirements for Class 4 laser systems.

Single tube

F201 laser f201 lasers contain a single tube (optical resonator) within the laser chassis. These lasers incor-

porate a single set of controls and indicators as well as a single set of cooling ports.

Model numbers

The last three characters in the F201 laser model number serve to designate the functional category,

cooling method, and model version. The functional category is indicated by an “S” (Switch-less) for OEM

models. The next letter indicates the cooling method: “W” for water-cooled units, “W” is omitted on f201

lasers since they are all water-cooled). The last letter in the model number indicates the current model

version beginning with “B”. For example, the model number. FSF201SC indicates a “C” version OEM water-

cooled f201 laser.

Important Note: All f201 lasers are water-cooled because of the integrated RF section’s heat

removal requirements. f201 lasers cannot be fan cooled. Damage to your laser will void your

warranty.

Caution: Possible Equipment Damage

Operating the laser at coolant temperatures above 22 °C (72 °F) may result in decreased
performance and/or premature failure of electronic components.

Содержание f201










































































































Результаты поиска

Содержание f201

Отзывы:

Похожие инструкции для f201

Бренды по названию

Популярные бренды

Novanta f201, Руководство пользователя

Результаты поиска

Содержание f201

Отзывы:

Похожие инструкции для f201

Бренды по названию

Популярные бренды