Novanta f201 страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 105

background image

UNPACKING

PAGE

|

12

Unpacking

The Unpacking section includes subsections:

•

Incoming inspection

•

Packaging guidelines

•

Unpacking the laser

•

Removing the lifting handles

Incoming inspection

Upon arrival, inspect all shipping containers for signs of damage. If you discover shipping damage,

document the damage (photographically if possible), then immediately notify the shipping carrier and

NOVANTA.
The shipping carrier is responsible for any damage occurring during transportation from NOVANTA to

your receiving dock.

Packaging guidelines

•

To prevent equipment damage or loss of small components, use care when removing packaging

materials.

•

After unpacking, review the Inventory section and verify that all components are on hand.

•

Do not lift or support the laser using the cooling fittings; lift the laser by the mounting feet or

baseplate only.

•

Save all shipping containers and packaging materials, including covers and plugs. Use these special-

ized packing materials when shipping the laser to another location.

•

When packing a laser for shipment, be sure to remove all accessory items not originally attached

to the laser including beam delivery components, cooling tubing, etc.

•

Refer to Packaging instructions drawings in the Technical Reference chapter for details on packag-

ing f201 lasers using NOVANTA-supplied shipping materials.

•

When shipping water-cooled lasers, remember to drain all cooling water from the laser and then

cap the open fittings to prevent debris from entering the coolant path.

•

F201 lasers and power supplies are heavy and awkward to move. Use appropriate lifting techniques,

additional personnel, and/or hoisting equipment to prevent a risk of injury when rigging this equip-

ment.

Warning: Serious Personal Injury

Lifting or moving f201 lasers poses a potential for injury. Use appropriate lifting techniques and/or
equipment to prevent a risk of injury. In some cases, you may require assistance from additional
personnel to safely unpack and move this equipment.

«
...
10
11
12
13
14
...
»

Содержание f201










































































































Отзывы:

Нет отзывов

Похожие инструкции для f201

Бренд: Camille Bauer Страницы: 62

Бренд: Xsens Страницы: 4

Бренд: Eastron Страницы: 2

Бренд: EASTERN INSTRUMENTS Страницы: 3

Бренд: Barksdale Страницы: 2

Бренд: EPE Conseil Страницы: 3

Бренд: Primes Страницы: 48

Бренд: Omega Страницы: 20

Бренд: 3M Страницы: 168

Бренд: Vectronics Страницы: 28

AquiTron AT-WFM

Бренд: aquilar Страницы: 20

Vigilant Plant MR20000

Бренд: YOKOGAWA Страницы: 230

Бренд: Polimaster Страницы: 24

Friendly Digital Piano Forte PV35

Бренд: Kawai Страницы: 102

LaserRange-Master T4 Pro

Бренд: LaserLiner Страницы: 68

Бренд: Liquid Controls Страницы: 16

Бренд: Omega Страницы: 4

Бренд: Niigata seiki Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды