NOVACAT V10 ED, Перевод оригинального руководства по эксплуатации

Страница: 22 / 86

- 22 -
1400_GB-Power Control_3843
POWER CONTROL
GB
Sensor test menu (together)
M4
In the Start menu, press the function key to open the Sensor Test menu.
Press function key , to return to the Start menu.
k
... S1 (p.t.o. cardan shaft)
Sensor function is checked while cardan shaft is
turning. At approx. 10 rpm the field will be shaded
black.
Function keys:
... change to higher menu (here: Start menu)
Display:
A shaded square shows an active sensor.
A white square shows that the sensor is not active.
Note!
When a turning component with sufficiently
low speed rotates past the sensor, the field
begins to flash.
Sensors:
a
... S15
Transport position for left mower unit
b
... S13
Transport position for right mower unit
c
... S3
Field transport and working positions for right mower
unit
d
... S7
Field transport and working positions for front mower
e
... S5
Field transport and working positions for left mower
unit
Value:
f
... Voltage indicator:
The top voltage display (min) shows the lowest
measured power supply value since the operation
started. This value is stored until the next new start.
The lower voltage display (act) shows the current
measured power supply value.
g
... S2 (Speed)
Speed sensor active. To check the signal, compare
the kph displayed in the Work menu with the tractor's
tachometer display.
h
... Software versions
shows the software versions used for the base
board (B) and the expansion board (E).
i
... S4 (Voltage indicator for right pressure transducer)
Shows the current given value of the right pressure
transducer. So the function can be checked using
the data sheet.
j
... S6 (Voltage indicator for left pressure transducer)
Shows the current given value of the left pressure
transducer. So the function can be checked using
the data sheet.
a b
c d e
f
g
h
i
k
j