NOVACAT V10 ED, Перевод оригинального руководства по эксплуатации

Страница: 34 / 86

- 34 -
1401_GB-ISObus Terminal_3846
ISOBUS TERMINAL
GB
a
Set speed level
Two speed levels can be set for the cross conveyor
belts.
Setting: in 5% steps, setting range: 5 – 100%
F11
T7
T8
T9
a
T7 Activate required cross conveyors (left, right or both)
T8 Swivel selected cross conveyor out
T9 Swivel selected cross conveyor in
Meaning of display:
a
Individual swivelling cross conveyor
Tick = pivoted
Cross = Pivoting deactivated, hydraulic cylinder is
not triggered.
TEST menu Novacat X8 Collector
F12a
a
a
c
d
e
Meaning of display:
a
Voltage indicator
The top voltage indicator shows the lowest measured
supply voltage value since the operation started.
This value is saved until the next new start.
The bottom voltage indicator shows the current
measured supply voltage value.
a
S1
PTO (cardan shaft)
In the right field the rotating cardan shaft sensor
function is checked. This field will have a black
background when the cardan shaft rotates faster
than 10 rpm.
c
Display of current sensor statuses
A black square indicates an active sensor. When
activating and not activating the sensors, the square must
c h a n g e b e t w e e n b l a c k a n d w h i t e .
S5 Left mower unit field
transport and working
positions
S15 Left mower unit
transport position
S13 Right mower unit
transport position
S3 Right mower unit field
transport and working
positions
S9 Right cross conveyor
initiator position
S7 Front mower position
S10 Left cross conveyor
initiator position
d S4
Right pressure transducer voltage indicator
e
S6
Left pressure transducer voltage indicator
TEST menu Novacat V10
F12b
a b
Meaning of display:
a
S11 Left angle sensor power, in volts
a
S12 Right angle sensor power, in volts