NOVACAT V10 ED, Перевод оригинального руководства по эксплуатации

Страница: 28 / 86

- 28 -
1400_GB-Power Control_3843
POWER CONTROL
GB
Angle sensor malfunction:
There is no automatic guarantee that the machine does
not exceed the max. transport height of 4m.
Remedy:
Minimize sideways movement using emergency activation
on hydraulic block.
Causes:
- Defective angle sensor (S11, S12)
- Defective power line to angle sensor
Front mower sensor malfunction:
The front mower sensor does not send a response to the
job calculator within 6 seconds of pressing the key [Raise
front mower] or [Raise all mowing units].
Causes:
- Defective sensor
- Defective line
Checking the sensor setting:
When the front mower is in transport position the sensor
(S7) must be covered.
Immediate measures:
- Check in the menu
M2
if the front mower has been
activated
- Check the sensor lines.
Warning: Mower units not in neutral position
There are two possible causes for this warning to occur:
1. The mower units are not in the neutral position and
therefore filling the hydraulic relief is impossible.
2. The cardan shaft is still turning and mower is in
working position, but not in the neutral position,
and the tractor speed is greater than 0 kph.