Nortel Passport 4400 Скачать руководство пользователя страница 38

Страница: 38 / 144

206906-D Rev 00 4.2

•

If you are reinstalling Install Tool, see

“Null Modem Driver Troubleshooting

Tip” on page 36

before starting the installation.

•

It is recommended that you close all other applications on your workstation.

•

If Windows Dial-Up Networking is not installed on your workstation, decide
which COM port you are using before starting the installation.

Installing the Software

Use the procedures that follow to install the Passport 4400 Install Tool software.

Installation Procedures

To install the Install Tool program and any additional required software
components, complete the following procedures.

Starting the Installation

To start the installation program, follow these steps:

Start Windows Explorer and open the directory containing the executable file.

If you are installing from the distribution CD, open the software directory,
then open the installtool directory.

Double-click the executable file name.

The first installation window opens, prompting you to continue.

Click on Yes to continue.

Содержание Passport 4400

















































































































































Результаты поиска

Содержание Passport 4400

Отзывы:

Nortel Passport 4400, Инструкция по использованию, Страница: 38 / 144

Результаты поиска

Содержание Passport 4400

Отзывы: