Nortel Passport 4400, Инструкция по использованию, Страница: 113 / 144

113
Using Passport 4400 Install Tool Version 4.2
Appendix C
Passport 4400 IP Addressing
This appendix provides a brief overview of the IP addressing requirements for
configuring Passport 4400s for either bridging or routing mode.
Topics in this appendix:
• Overview
• Default IP Addresses
• Bridging and Routing Modes
Overview
You can use Install Tool to configure and monitor local and remote
Passport 4400s in your network. To a large extent, the Passport 4400 routing
mode (bridging and routing) determines which nodes in the network will be
accessible through your local connection.
Default IP Addresses
Every factory-defaulted Passport 4400 assigns the following IP addresses:
• Assigns 192.168.200.200 to the bridge interface.
• Assigns 192.168.200.201 to the workstation connected to the management
port, at the time the Dial-Up Networking connection is established.
Whenever you reset a Passport 4400 to factory defaults, these IP address
assignments are made.