Nortel Passport 4400, Инструкция по использованию, Страница: 18 / 144

18
206906-D Rev 00 4.2
Passport 4400 Device Management Tools
The Passport 4400 provides the following device management tools:
Tool When To Use It For More Information
Install Tool Use Install Tool to set up a factory-new
or factory-defaulted Passport 4400,
such that network connectivity and
basic services are enabled. In addition,
you can use Install Tool to perform
real-time monitoring of Passport 4400s
units in your network. Refer to this manual and
the Install Tool online help
for complete
documentation.
Passport 4400
Configurator Use the Configurator to perform any
Passport 4400 configuration task.
Note 1: The Passport 4400
Configurator is an embedded web
interface. It is a built-in component of
Passport 4400 units running software
release 4.0 and higher.
Note 2: To access the Passport 4400
Configurator from within Install Tool,
select
Web Configurator from the
System menu.
Note 3: Like Install Tool, the
Passport 4400 Configurator can access
the Passport 4400 through PPP IP
connectivity.
Refer to the Configuring
and Operating
Passport 4400 Software
(Nortel Networks part
number 206916) online
documentation.
Command Line
Interface (CLI) Use the CLI to perform any
configuration task, especially low-level
or specialized tasks. Refer to the
Passport 4400 Reference
for CLI (Nortel Networks
part number 209666).
Passport 4400
Mass Deployment
and Reporting Tool Use the Mass Deployment and
Reporting Tool to generate
configuration reports and to replicate
the configuration of one unit to multiple
units. Refer to the Using the
Passport 4400 Mass
Deployment and
Reporting Tool (Nortel
Networks part number
209665)