Describing the terminal 1-9
2. When the caller inserts a card, the terminal makes sure
there is a magnetic stripe on the card and then makes a
data connection to the Millennium Manager.
If the caller uses a calling card, the terminal may
connect to a card validation service.
3. Card validation occurs, the verification call is discon
nected, and the terminal selects the carrier chosen by
the caller, or the default carrier if one was not selected.
4.
If the caller has not dialed the telephone number, the
terminal prompts for the number. If the card and the
number are valid, the terminal dials out to the switch.
5. Once the call is answered, call supervision occurs. At
this time the terminal may begin creating a call detail
record (CDR) for the call, depending on what types of
calls it has been configured to record.
6. When the caller hangs up, the terminal returns to the
idle state. If the card is forgotten in the card reader, an
alarm is generated and sent to the Millennium Manager.
Note:
Terminals can be configured so that calling cards are
validated by the Automated Calling Card Service (ACCS) at
the Central Office Network or to Alternate Operator Services
instead of through the Millennium Manager.
Using smart cards
1. The caller inserts the smart card either before or after a
number is dialed.
• Smart cards must be inserted with the chip facing
up and towards the front of the card.
• These cards are left in the card reader for the dura
tion of the call.
• The VFD shows the value on the card. If the
number has been dialed, it also shows the initial
rate.
• When the call is complete, a visual prompt reminds
the caller to remove the card.
Millennium multi-pay terminal installation, operation, and maintenance guide
Содержание Millennium multi-pay M1211
