Nortel Millennium multi-pay M1211, Инструкция по установке, эксплуатации и обслуживанию

Страница: 54 / 350

Describing the terminal 1-33
Entering the craft interface
To access the craft interface, you will enter an access code
and a PIN (personal identification number) on the main
keypad. These codes serve as security gates and as
notifiers to the Millennium Manager for operation code
purposes.
The access code and PINs are configured in the Millennium
Manager by the system administrator based on the
decisions of the operating company maintenance personnel
requirements. PINs can be assigned according to the levels
of access privileges required. For instance a craftsperson
who only does coin collections would have a different PIN
from someone who replaces modules inside the terminal.
The seven-digit access code is downloaded to the terminal
from the Millennium Manager when the terminal is installed.
There is also a default access code, which is resident in the
terminal firmware.
Use the default access code if the assigned code is not in
the memory, such as when:
• a power failure has caused the terminal to lose its
memory
• the control PCP or the firmware was replaced
• the terminal has just been installed.
Privilege levels
When you use the craft interface, your privilege level deter­
mines the craft interface level you can access. Your five­
digit PIN determines your privilege level.
The two levels of the craft interface are:
• the operation-code interface
• the maintenance interface
Millennium multi-pay terminal installation, operation, and maintenance guide