Nortel Millennium multi-pay M1211, Инструкция по установке, эксплуатации и обслуживанию

Страница: 163 / 350

Troubleshooting strategies 6-9
7. Close the terminal.
8. Initiate a local and long-distance coin call to confirm that
the coin system is working properly.
Escrow unit jam
If the coin jam did not occur in the coin validator, then it may
be in the escrow unit.
1. Remove the coin validator as explained in Replacing
the coin validator in Chapter 7.
2. Check the throat of the escrow unit for trapped coins or
debris and remove them. DO NOT use any tools to try
and unjam the escrow as this could result in damage to
the gears or the escrow motor. Use the following proce­
dure to attempt to clear the escrow:
a) Turn the escrow upside down and rock the escrow
with a side-to-side motion to empty out any debris
or coins which may be blocking the coin path.
b) If no debris or coins fall out, use your finger to gently
apply steady pressure to move the coin bucket. If
the bucket does not move with gentle, steady pres­
sure, replace the escrow and send the jammed
escrow in for repair.
c) If you replace the escrow you will have to rerun the
INSTALL procedure to reset the light levels in the
escrow sensors. This process is described in
Chapter 3.
3. Replace the escrow in the terminal.
4. Perform the coin unit test; see Checking the coin unit
described in Chapter 5.
5. Initiate a local and long-distance coin call to confirm that
the coin system is working properly.
Millennium multi-pay terminal installation, operation, and maintenance guide