Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 89 / 162

Configure E1/T1 ports on a Call Server 89
Prompt Response Description
MG_CARD supl sh card The physical card for the digital loop association to the PRI
Gateway.
The format is: superloop, shelf number, card number.
ATTENTION
Even card numbers are applicable (that is, 2, 4, 6, 8).
WARNING
DO NOT use odd loop numbers. Odd loop
numbers may cause issues with existing
equipment.
PORT 0 - 1 Port number of the NTBK51AA/NTBK51CA for the
D-channel.
ATTENTION
For the PRI Gateway, the following software package for
the functionality that allows the use of port 0 or port 1 is
provided in CS 1000 Extended Media Gateway PRI (MGP)
package 418
USR PRI This D-channel is used for Primary Rate only.
IFC NI2 Interface type for the D-channel.
DCHL 0 - 254 Loop number for the D-channel. (See DLOP loop number.)
SIDE (USR) NET The system is network/user side.
... ...
--End--
Use the steps in Procedure 20 “Configuring a D-channel interface to
support PRI2/EURO D-channels using LD 17” (page 89) to configure the
PRI2/Euro D-channel interface for the PRI Gateway.
Procedure 20
Configuring a D-channel interface to support PRI2/EURO D-channels using
LD 17
Step Action
1 Log on to the CS 1000E.
2 To access LD 17, enter:
LD 17
3 Enter the responses shown in Table 20 "PRI2/Euro D-channel
interface configuration (LD 17)" (page 90) .
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.