Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 71 / 162

Configure the Media Gateway Controller 71
Procedure 13
Configuring Media Gateway Controller Tone and Conference using LD 17
Step Action
1 Log on to the CS 1000E Call Server.
2 To access LD 17, enter:
LD 17
3 Enter the responses shown in Table 14 "Media Gateway tone
and Conference configuration (LD 17)" (page 71) .
Table 14
Media Gateway tone and Conference configuration (LD 17)
Prompt Response Description
REQ CHG
TYPE CFN Configuration record.
CEQU YES Common equipment.
...
MGTDS aaa bbb Allows the configuration of two Media Gateway TDS
loops simultaneously.
aaa = loop, bbb = 0–255, X to delete the loop
IPMG supl sh Superloop and shelf of IPMG on which this MGTDS are
associated. No default value is assigned if the IPMG is
not associated. This prompt allows for the association
of the MGTDS with a particular IPMG.
supl = IPMG superloop, sh = IPMG shelf
MGCONF aaa bbb ccc ddd Allow the configuration of up to four Media Gateway
conference loops simultaneously.
aaa = loop, bbb = 0–255, X to delete the loop
IPMG supl sh Superloop and shelf of IPMG on which this MGTDS are
associated. No default value is assigned if IPMG is not
associated. This prompt allows for the association of
the MGTDS with a particular IPMG.
supl = IPMG superloop, sh = IPMG shelf
--End--
Configure the Media Gateway Controller
The MGC command line can be accessed using the NTBK48AA three-port
SDI cable. A null modem adapter is used to connect to the MGC serial
port.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.