Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 128 / 162

128 Maintenance and diagnostics
Step Action
1 Log on to the CS 1000E.
2 To access LD 96, enter:
LD 96
3 Enter the commands shown in Table 37 "DDCH maintenance
commands (LD 96)" (page 128) .
ATTENTION
In this table, x = the DCH number, and X = the MSDL address (loop
shelf card).
Table 37
DDCH maintenance commands (LD 96)
Command Description
DIS DCH x Disable DCH x.
ENL DCH x (FDL) Enable DCH x and attempt to establish the link, and force
download to MSDL.
EST DCH x Establish multiple frame operation on D-channel x.
RLS DCH x Release D-channel x.
RST DCH x Reset D-channel x, inhibit signaling.
STAT DCH (x) Get status of one or all D-channels.
STAT MON (x) Display the incoming and outgoing monitoring status of one or all
D-channels.
DIS MSDL sl s c (ALL) Disable DCHI card sl s c.
ENL MSDL sl s c (FDL, ALL) Enable DCHI card sl s c, with or without Force Download.
RST MSDL sl s c Reset MSDL card sl s c.
STAT MSDL sl s c (FULL) Get MSDL status sl s c, or a FULL STATUS.
--End--
PRI startup
Use Procedure 51 “Starting up the PRI” (page 128) to take the PRI/PRI2
and DDCH from a disabled state to an operational state.
Procedure 51
Starting up the PRI
Step Action
1 Check the status of all PRI/PRI2 cards.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.