Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 87 / 162

Configure E1/T1 ports on a Call Server 87
Procedure 18
Configuring DPNSS/DASS loops using LD 17
Step Action
1 Log on to the CS 1000E.
2 To access LD 17, enter:
LD 17
3 Enter the responses shown in Table 18 "DPNSS/DASS loop
configuration (LD 17)" (page 87) .
Table 18
DPNSS/DASS loop configuration (LD 17)
Prompt Response Description
REQ CHG Change existing data.
TYPE CEQU Make changes to common equipment parameters.
CFN YES Common equipment.
...
DDCS loop The PRI loop number for the new DPNSS/DASS link.
MG_CARD supl sh card The physical card for the DPNSS/DASS loop
association to the PRI Gateway.
The format is superloop, shelf, card.
ATTENTION
If using the NTAK93AB daughterboard, odd card
numbers are applicable (1, 3, 5, 7). If using the
onboard DPNSS/DASS, odd and even numbers are
applicable (1, 2, 3, 4, 5, 6, 7, 8).
--End--
D-channel configuration
Table 19 "PRI/NI2 D-channel interface configuration (LD 17)" (page
88)
and Table 20 "PRI2/Euro D-channel interface configuration (LD 17)"
(page 90) show the D-channel interface configuration in LD 17 needed to
support PRI/NI2 and PRI2/EURO D-channel interfaces.
The example given in the tables is specific to EURO and NI2 interfaces.
However, PRI D-channel in the PRI Gateway is also supported on other
interface types as well.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.